Venus


Floor Mounted



Ideal for restrooms that have high ceiling space. Flush top line gives a modern appearance while simplified construction allows for easy installation. The uniform overall height of pilaster and door creates a pleasing visual appearance. It is also adaptable to any building style and interior requirement.

Frameless system that uses only stainless steel bracket, thus creating a cleaner and neater appearance.



Doors and pilasters are rebated to perform an overlapped effect without door jamb.



Specifications

General

Toilet cubicle system shall be ProCubix Venus Series floor mounted system, manufactured by ProCubix Contracts Sdn. Bhd.

Panels

Shall be of either 13mm or 15mm thick solid compact laminates made from impregnated kraft paper with phenolic resin and compressed together with melamine impregnated decorative paper under high pressure temperature to form high pressure laminates. Two-piece construction is not acceptable. Panels shall have following characteristics - humidity resistant, scratch resistant, easy to clean.

Doors

Shall be of the same materials and construction as panels. Thickness shall be of either 19mm or 22mm. Door size shall be of 1680mm height and width to suit site condition. It shall be rebated at two vertical ends.

Pilasters

Shall be of the same materials and construction as panels and doors. Thickness shall be of 19mm or 22mm. Pilasters shall be also rebated to suit the door panels. These shall be fastened to a full length steel bar by means of two bolts into cross dowels and to the floor with two threaded rods with nuts, lock washers and lead double expansion shields. Floor anchoring shall be concealed by a 100mm high one piece stainless steel floor shoe.

Hardware

Comprises of stainless steel slide indicator latch, coat hook with rubber bumper and heavy duty gravity hinges.

Fittings

Angle brackets shall be of minimum 1.8mm thick stainless steel with two holes for fastening purpose. Stainless steel floor shoe shall be of one-piece construction in minimum thickness of 0.9mm. All hardware and fittings shall be fastened with one way fasteners for prevention of vandalism.

Colours

Panel colour shall be in accordance to manufacturer's colour swatch. Hardware and fittings shall be in stainless steel satin finish.

Dimension

Overall system height - 1800mm height with 120mm floor clearance

Accessories

Lock set (outside view)	Coat hook	'L' bracket
Lock set (inside view)	Gravity hinge	Shoe trim